Skip to content

Packaging and Transport of Nuclear Substances Regulations, 2015

SOR/2015-145

In forceCurrent to September 30, 2026 HistoryRegistered on June 12, 2015Made under: Nuclear Safety and Control Act

Follow

Classification of Material and Packages

Section 5

Marginal note:LSA-I material

  •  (1) LSA material is classified as LSA-I material if it is either non-fissile material or fissile-excepted radioactive material and if it consists of

    • (a) ores that contain naturally occurring radionuclides with a uranium and thorium concentration not greater than 3% by mass;

    • (b) radioactive material for which the A2 value is unlimited, except for ores that contain naturally occurring radionuclides with a uranium and thorium concentration greater than 3% by mass;

    • (c) concentrates of unirradiated thorium, of natural uranium or of depleted uranium, as those terms are defined in the IAEA Regulations, or their unirradiated compounds or mixtures in solid or liquid form;

    • (d) any mill tailings, contaminated earth, concrete, rubble, other debris and activated materials in which the radioactive material is essentially uniformly distributed and for which the average specific activity does not exceed 10-6 A2/g; or

    • (e) other radioactive material in which the activity is distributed throughout and for which the estimated average specific activity does not exceed 30 times the activity concentration limit for exempt material values set out in the IAEA Regulations or in a certificate for a basic radionuclide value that is not listed in those Regulations.

  • Marginal note:LSA-II material

    (2) LSA material is classified as LSA-II material if it consists of material

    • (a) that is less than 225 L of water with a tritium concentration that has an activity level not greater than 0.8 TBq/L; or

    • (b) in which the activity is distributed throughout and for which the estimated average specific activity does not exceed 10-4 A2/g for solids and gases and 10-5 A2/g for liquids.

  • Marginal note:LSA-III material

    (3) LSA material is classified as LSA-III material if it consists of solid material that is not in powder form and that meets the applicable requirements of the IAEA Regulations.

Version in force since June 12, 2015

Unofficial reproduction of the consolidated text published by the Department of Justice Canada, permitted by the Reproduction of Federal Law Order. Only the official text is authoritative.